Mechanical Engineering Honours (B.Eng.) (142 credits)
Offered by: Mechanical Engineering (Faculty of Engineering)
Degree: Bachelor of Engineering
Program credit weight: 142 credits
Program Description
**This program is not currently offered**
Program credit weight for Quebec CEGEP students: 113 credits
Program credit weight for out-of-province students: 142 credits
To prepare the mechanical engineer for a wide range of career possibilities, there is a heavy emphasis in our curriculum on the fundamental analytical disciplines. This is balanced by a sequence of experimental and design Engineering courses, which include practice in design, manufacturing, and experimentation. In these courses, students learn how to apply their analytical groundwork to the solution of practical problems.
The Honours program is particularly suitable for those with a high aptitude in mathematics and physics and gives a thorough grounding in the basic engineering sciences.
Special interests are satisfied by selecting appropriate complementary courses from among those offered with a specific subject concentration, such as management, industrial engineering, computer science, controls and robotics, bio-engineering, aeronautics, combustion, systems engineering, etc.
Note: For information about Fall 2025 and Winter 2026 course offerings, please check back on May 8, 2025. Until then, the "Terms offered" field will appear blank for most courses while the class schedule is being finalized.
Required Year 0 (Freshman) Courses (29 credits)
Generally, students admitted to Engineering from Quebec CEGEPs may be granted transfer credit for these Year 0 courses and enter a 113-credit program.
For information on transfer credit for French Baccalaureate, International Baccalaureate exams, Advanced Placement exams, Advanced Levels, and Science Placement Exams, see http://www.mcgill.ca/engineering/current-students/undergraduate/new-stud... and select your term of admission.
| Course | Title | Credits |
|---|---|---|
| CHEM 110 | General Chemistry 1. | 4 |
General Chemistry 1. Terms offered: this course is not currently offered. A study of the fundamental principles of atomic structure, radiation and nuclear chemistry, valence theory, coordination chemistry, and the periodic table. | ||
| CHEM 120 | General Chemistry 2. | 4 |
General Chemistry 2. Terms offered: this course is not currently offered. A study of the fundamental principles of physical chemistry. | ||
| MATH 133 | Linear Algebra and Geometry. | 3 |
Linear Algebra and Geometry. Terms offered: Summer 2025 Systems of linear equations, matrices, inverses, determinants; geometric vectors in three dimensions, dot product, cross product, lines and planes; introduction to vector spaces, linear dependence and independence, bases. Linear transformations. Eigenvalues and diagonalization. | ||
| MATH 140 | Calculus 1. | 3 |
Calculus 1. Terms offered: Summer 2025 Review of functions and graphs. Limits, continuity, derivative. Differentiation of elementary functions. Antidifferentiation. Applications. | ||
| MATH 141 | Calculus 2. | 4 |
Calculus 2. Terms offered: Summer 2025 The definite integral. Techniques of integration. Applications. Introduction to sequences and series. | ||
| PHYS 131 | Mechanics and Waves. | 4 |
Mechanics and Waves. Terms offered: this course is not currently offered. The basic laws and principles of Newtonian mechanics; oscillations, waves, and wave optics. | ||
| PHYS 142 | Electromagnetism and Optics. | 4 |
Electromagnetism and Optics. Terms offered: this course is not currently offered. The basic laws of electricity and magnetism; geometrical optics. | ||
AND 3 credits selected from the approved list of courses in Humanities and Social Sciences, Management Studies and Law, listed below under Complementary Studies (Group B).
Note: FACC 100 Introduction to the Engineering Profession. must be taken during the first year of study.
Required Non-Departmental Courses (27 credits)
| Course | Title | Credits |
|---|---|---|
| CIVE 207 | Solid Mechanics. | 4 |
Solid Mechanics. Terms offered: this course is not currently offered. Stress-strain relationships; elastic and inelastic behaviour; performance criteria. Elementary and compound stress states, Mohr's circle. Shear strains, torsion. Bending and shear stresses in flexural members. Deflections of beams. Statically indeterminate systems under flexural and axial loads. Columns. Dynamic loading. | ||
| COMP 208 | Computer Programming for Physical Sciences and Engineering . | 3 |
Computer Programming for Physical Sciences and Engineering . Terms offered: this course is not currently offered. Programming and problem solving in a high level computer language: variables, expressions, types, functions, conditionals, loops, objects and classes. Introduction to algorithms such as searching and sorting. Modular software design, libraries, file input and output, debugging. Emphasis on applications in Physical Sciences and Engineering, such as root finding, numerical integration, diffusion, Monte Carlo methods. | ||
| FACC 100 | Introduction to the Engineering Profession. 1 | 1 |
Introduction to the Engineering Profession. Terms offered: this course is not currently offered. Introduction to engineering practice; rights and code of conduct for students; professional conduct and ethics; engineer's duty to society and the environment; sustainable development; occupational health and safety; overview of the engineering disciplines taught at McGill. | ||
| FACC 250 | Responsibilities of the Professional Engineer. | 0 |
Responsibilities of the Professional Engineer. Terms offered: this course is not currently offered. A course designed to provide all Engineering students with further training regarding their responsibilities as future Professional Engineers. Particular focus will be placed on three professional characteristics that future engineers must demonstrate: i) professionalism, ii) ethical and equitable behaviour, and iii) consideration of the impact of engineering on society and the environment. | ||
| FACC 300 | Engineering Economy. | 3 |
Engineering Economy. Terms offered: Summer 2025 Introduction to the basic concepts required for the economic assessment of engineering projects. Topics include: accounting methods, marginal analysis, cash flow and time value of money, taxation and depreciation, discounted cash flow analysis techniques, cost of capital, inflation, sensitivity and risk analysis, analysis of R and D, ongoing as well as new investment opportunities. | ||
| FACC 400 | Engineering Professional Practice. | 1 |
Engineering Professional Practice. Terms offered: this course is not currently offered. Laws, regulations and codes governing engineering professional practice. Responsibility and liability. Environmental legislation. Project and organization management. Relations between engineer and client. Technical practice - analysis, design, execution and operation. | ||
| MATH 262 | Intermediate Calculus. | 3 |
Intermediate Calculus. Terms offered: Summer 2025 Series and power series, including Taylor's theorem. Brief review of vector geometry. Vector functions and curves. Partial differentiation and differential calculus for vector valued functions. Unconstrained and constrained extremal problems. Multiple integrals including surface area and change of variables. | ||
| MATH 263 | Ordinary Differential Equations for Engineers. | 3 |
Ordinary Differential Equations for Engineers. Terms offered: Summer 2025 First order ODEs. Second and higher order linear ODEs. Series solutions at ordinary and regular singular points. Laplace transforms. Linear systems of differential equations with a short review of linear algebra. | ||
| MATH 264 | Advanced Calculus for Engineers. | 3 |
Advanced Calculus for Engineers. Terms offered: Summer 2025 Review of multiple integrals. Differential and integral calculus of vector fields including the theorems of Gauss, Green, and Stokes. Introduction to partial differential equations, separation of variables, Sturm-Liouville problems, and Fourier series. | ||
| MATH 271 | Linear Algebra and Partial Differential Equations. | 3 |
Linear Algebra and Partial Differential Equations. Terms offered: this course is not currently offered. Applied Linear Algebra. Linear Systems of Ordinary Differential Equations. Power Series Solutions. Partial Differential Equations. Sturm-Liouville Theory and Applications. Fourier Transforms. | ||
| WCOM 206 | Communication in Engineering. | 3 |
Communication in Engineering. Terms offered: Summer 2025 Written and oral communication in Engineering (in English): strategies for generating, developing, organizing, and presenting ideas in a technical setting; problem-solving; communicating to different audiences; editing and revising; and public speaking. Course work based on academic, technical, and professional writing in engineering. | ||
- 1
Note: FACC 100 Introduction to the Engineering Profession. must be taken during the first year of study.
Required Mechanical Engineering Courses (62 credits)
| Course | Title | Credits |
|---|---|---|
| MECH 215 | Statics | 3 |
Statics Terms offered: this course is not currently offered. Static equilibrium of particles and rigid bodies. Beams, trusses, frames and machines. Concept of potential energy and virtual work. Static equilibrium and stability. Systems of forces, moments and couples. Static equilibrium and stability of particles and rigid bodies. Free body diagrams: 2D and 3D analysis. Structures: beams, trusses, joints, frames and machines. Concept of work and energy. Centers of mass, centroids, moments of inertia, and parallel-axis theorem. Static friction. | ||
| MECH 220 | Mechanics 2. | 4 |
Mechanics 2. Terms offered: this course is not currently offered. Kinematics of particles and rigid bodies. Particle dynamics: force-momentum and work-energy approaches. Kinematics and kinetics of rigid bodies. | ||
| MECH 241 | Fundamentals of Thermodynamics | 4 |
Fundamentals of Thermodynamics Terms offered: this course is not currently offered. Thermodynamic systems, properties, and state postulate. First law of thermodynamics: energy, work and heat. Properties of pure substances: phase change processes, property diagrams, property tables, and ideal gas model. Energy analysis of closed systems. Mass and energy analysis of control volumes: analysis of steady and transient engineering systems. Second law of thermodynamics: analysis of Carnot heat engines, refrigerators, and heat pumps. Entropy. Gas power cycles. Introduction to compressible flow. | ||
| MECH 262 | Statistics and Measurement Laboratory. | 3 |
Statistics and Measurement Laboratory. Terms offered: this course is not currently offered. Introduction to probability: conditional probability, binomial and Poisson distributions, random variables, laws of large numbers. Statistical analysis associated with measurements; regression and correlation. Basic experimental laboratory techniques, including the measurement of strain, pressure, force, position, and temperature. | ||
| MECH 292 | Design 1: Conceptual Design. | 3 |
Design 1: Conceptual Design. Terms offered: this course is not currently offered. Introduction to design. Problem formulation, idea generation, feasibility study, preliminary design, design, analysis, design evaluation, project management, and optimal design. | ||
| MECH 309 | Numerical Methods in Mechanical Engineering. | 3 |
Numerical Methods in Mechanical Engineering. Terms offered: this course is not currently offered. Numerical techniques for problems commonly encountered in Mechanical Engineering are presented. Chebyshev interpolation, quadrature, roots of equations in one or more variables, matrices, curve fitting, splines and ordinary differential equations. The emphasis is on the analysis and understanding of the problem rather than the details of the actual numerical program. | ||
| MECH 321 | Mechanics of Deformable Solids. | 3 |
Mechanics of Deformable Solids. Terms offered: this course is not currently offered. Modern phenomenological theories of the behaviour of engineering materials. Stress and strain concepts and introduction to constitutive theory. Applications of theory of elasticity and thermoelasticity. Introduction to finite element stress analysis method and its application to structural design of a machine element. | ||
| MECH 331 | Fluid Mechanics 1. | 3 |
Fluid Mechanics 1. Terms offered: this course is not currently offered. Physical properties of fluids. Kinematics and dynamics of fluid flow: stress in a continuum, rates of strain, rotation. Control volume analysis; conservation of mass, linear momentum and energy; Euler and Bernoulli equations; Flow measurement. Dimensional analysis and dynamical similarity. Laminar and turbulent flow in pipes and boundary layers. | ||
| MECH 341 | Thermodynamics 2. | 3 |
Thermodynamics 2. Terms offered: this course is not currently offered. Generalized thermodynamics relations. Real gas effects, gas tables, dense gas equations of state and generalized compressibility, enthalpy, and entropy charts. Vapour and gas power cycles (coal/nuclear power plants). Refrigerators and heat pumps. Psychrometry and air conditioning processes. Thermodynamics of reactive gas mixtures. | ||
| MECH 346 | Heat Transfer. | 3 |
Heat Transfer. Terms offered: this course is not currently offered. Basic concepts and overview. Steady and unsteady heat conduction. Fin Theory. Convective heat transfer: governing equations; dimensionless parameters; analogy between momentum and heat transfer. Design correlations for forced, natural, and mixed convection. Heat exchangers. Radiative heat transfer: black- and gray-body radiation; shape factors; enclosure theory. Thermal engineering design project. | ||
| MECH 360 | Principles of Manufacturing. | 3 |
Principles of Manufacturing. Terms offered: this course is not currently offered. Theory and practice of modern manufacturing processes: machining, forming, and casting. Producing parts using computer assisted tools from CAD to CNC machining followed by measurement of part quality. Hands-on machining of parts. | ||
| MECH 362 | Mechanical Laboratory 1. | 2 |
Mechanical Laboratory 1. Terms offered: this course is not currently offered. Experiments will be performed in four areas: MECH 240 Thermodynamics, MECH 315 Vibrations, MECH 331 Fluid Mechanics 1, and MECH 346 Heat Transfer. Students should sign up to do experiments in one or more areas the term following the completion of one or more of the above courses. Students will not formally register for this course until the term in which they will complete all of the experiments. | ||
| MECH 383 | Applied Electronics and Instrumentation. | 3 |
Applied Electronics and Instrumentation. Terms offered: this course is not currently offered. Discrete and integrated components, both analogue and digital. Characteristics of passive elements. Semiconductors, amplifiers, filters, oscillators, modulators, power supplies and nonlinear devices. Introduction to digital electronics. Transducer/signal conditioner interfacing considerations. | ||
| MECH 390 | Computer Aided Design | 3 |
Computer Aided Design Terms offered: this course is not currently offered. Introduction of the essential modern engineering design graphics skills and knowledge. Basic design graphic projection theory and perspective projections. Technical drawing and drafting skills. Computer-Aided Design (CAD) software skills and 3D parametric solid modelling techniques. Introduction of design for manufacturing as well as design for assembly methods and their application to improve the design. Introduction of standard geometric dimensioning and tolerancing techniques to apply in the engineering graphics drawings and engineering design problem. | ||
| MECH 403D1 | Thesis (Honours). | 3 |
Thesis (Honours). Terms offered: this course is not currently offered. This course, together with MECH 404, involves a research project containing both engineering theory and design components, and requiring a theoretical and/or experimental investigation. Students are supervised by the course instructor and mentored by one or more staff members. The work culminates with the submission of a thesis. | ||
| MECH 403D2 | Thesis (Honours). | 3 |
Thesis (Honours). Terms offered: this course is not currently offered. See MECH 403D1 for course description. | ||
| MECH 404 | Honours Thesis 2. | 3 |
Honours Thesis 2. Terms offered: this course is not currently offered. This course is part of the same thesis project as course MECH 403. | ||
| MECH 419 | Advanced Mechanics of Systems. | 4 |
Advanced Mechanics of Systems. Terms offered: this course is not currently offered. Lagrange's equations of motion. Hamilton's principle. Variational methods. Discrete linear systems: analytical and numerical methods. Distributed parameter systems: exact solutions and discretization techniques. Electrical-mechanical-acoustical analogies. Stability of systems. Nonlinear dynamics: phase-plane, perturbation and other methods of solution. | ||
| MECH 430 | Fluid Mechanics 2. | 3 |
Fluid Mechanics 2. Terms offered: this course is not currently offered. Review of thermodynamics of gases, one dimensional isentropic flow and choking. Nozzles and wind tunnels. Normal shock waves. Flow in constant area ducts with friction and heat exchange. Compressible irrotational flow. Oblique shock waves and Prandtl-Meyer expansion. Supersonic aerofoil and wing theory. | ||
| MECH 494 | Honours Design Project. | 3 |
Honours Design Project. Terms offered: this course is not currently offered. An advanced design project course with emphasis on analytical solutions, performance prediction and validation, and planning for production. Students are supervised by the course instructor and mentored by one or more staff members. | ||
Technical Complementary Courses (18 credits)
3 credits from the following, chosen with the approval of either the thesis supervisor or the coordinator of the Honours program, when a thesis supervisor has not yet been secured:
| Course | Title | Credits |
|---|---|---|
| MATH 316 | Complex Variables. | 3 |
Complex Variables. Terms offered: this course is not currently offered. Algebra of complex numbers, Cauchy-Riemann equations, complex integral, Cauchy's theorems. Taylor and Laurent series, residue theory and applications. | ||
| MATH 323 | Probability. | 3 |
Probability. Terms offered: Summer 2025 Sample space, events, conditional probability, independence of events, Bayes' Theorem. Basic combinatorial probability, random variables, discrete and continuous univariate and multivariate distributions. Independence of random variables. Inequalities, weak law of large numbers, central limit theorem. | ||
| MATH 326 | Nonlinear Dynamics and Chaos. | 3 |
Nonlinear Dynamics and Chaos. Terms offered: this course is not currently offered. Linear systems of differential equations, linear stability theory. Nonlinear systems: existence and uniqueness, numerical methods, one and two dimensional flows, phase space, limit cycles, Poincare-Bendixson theorem, bifurcations, Hopf bifurcation, the Lorenz equations and chaos. | ||
| MATH 327 | Matrix Numerical Analysis. | 3 |
Matrix Numerical Analysis. Terms offered: this course is not currently offered. An overview of numerical methods for linear algebra applications and their analysis. Problem classes include linear systems, least squares problems and eigenvalue problems. | ||
| MATH 417 | Linear Optimization. | 3 |
Linear Optimization. Terms offered: this course is not currently offered. An introduction to linear optimization and its applications: Duality theory, fundamental theorem, sensitivity analysis, convexity, simplex algorithm, interior-point methods, quadratic optimization, applications in game theory. | ||
| MATH 478 | Computational Methods in Applied Mathematics . | 3 |
Computational Methods in Applied Mathematics . Terms offered: this course is not currently offered. Solution to initial value problems: Linear, Nonlinear Finite Difference Methods: accuracy and stability, Lax equivalence theorem, CFL and von Neumann conditions, Fourier analysis: diffusion, dissipation, dispersion, and spectral methods. Solution of large sparse linear systems: iterative methods, preconditioning, incomplete LU, multigrid, Krylov subspaces, conjugate gradient method. Applications to, e.g., weighted least squares, duality, constrained minimization, calculus of variation, inverse problems, regularization, level set methods, Navier-Stokes equations | ||
6 credits from the following:
| Course | Title | Credits |
|---|---|---|
| MECH 513 | Control Systems. | 3 |
Control Systems. Terms offered: this course is not currently offered. State-space modelling and related linear algebra. Controllability and observability of linear time-invariant systems and corresponding tests, system realizations. Stability: Bounded-Input-Bounded-Output (BIBO), internal, Lyapunov. Linear state feedback control: pole placement and root locus design methods, linear quadratic regulator. State observers: full- and reduced-order designs, separation principle, Linear Quadratic Gaussian (LQG) design. Introduction to optimal control and optimal state estimation. | ||
| MECH 546 | Finite Element Methods in Solid Mechanics. | 3 |
Finite Element Methods in Solid Mechanics. Terms offered: this course is not currently offered. Discrete systems; variational formulation and approximation for continuous systems; direct and variational methods of element formulation in 1- 2- and 3 dimensions; formulation of isoparametric finite elements; plate and shell elements; finite element method for static analysis, vibration analysis and structural dynamics; introduction to nonlinear problems. | ||
| MECH 559 | Engineering Systems Optimization. 1 | 3 |
Engineering Systems Optimization. Terms offered: this course is not currently offered. Introduction to systems-oriented engineering design optimization. Emphasis on i) understanding and representing engineering systems and their structure, ii) obtaining, developing, and managing adequate computational (physics- and data-based) models for their analysis, iii) constructing appropriate design models for their synthesis, and iv) applying suitable algorithms for their numerical optimization while accounting for systems integration issues. Advanced topics such as coordination of distributed problems and non-deterministic design optimization methods. | ||
| MECH 562 | Advanced Fluid Mechanics. | 3 |
Advanced Fluid Mechanics. Terms offered: this course is not currently offered. Conservation laws, control volume analysis, Navier stokes equations, dimensional analysis and limiting forms of N-S equation, laminar viscous flows, boundary layer theory, inviscid potential flows, lift and drag, introduction to turbulence. | ||
| MECH 578 | Advanced Thermodynamics. | 3 |
Advanced Thermodynamics. Terms offered: this course is not currently offered. Review of classical mechanics; Boltzmann statistics, thermodynamics of ideal gases; Fermi-Dirac and Bose-Einstein statistics, Gibbsian ensembles; elementary kinetic theory of transport processes, Boltzmann equation, Boltzmann H-theorem and entropy, KBG approximation, discussion on the solution of Boltzmann equation; Maxwell transport equations, derivation of Navier Stokes equations. | ||
| MECH 579 | Multidisciplinary Design Optimization. 1 | 3 |
Multidisciplinary Design Optimization. Terms offered: this course is not currently offered. A comprehensive introduction to important algorithms in sensitivity analysis and multidisciplinary design optimization of large systems. Topics include: unconstrained and constrained optimization, sensitivity analysis, gradient-free optimization, multi-objective optimization, and various multidisciplinary algorithms and approaches for design optimization. | ||
- 1
Note: Students select either MECH 559 Engineering Systems Optimization. or MECH 579 Multidisciplinary Design Optimization..
6 credits at the 300 level or higher, chosen from Mechanical Engineering courses (subject code MECH). One of these two courses (3 credits) must be from the following list:
| Course | Title | Credits |
|---|---|---|
| CHEE 563 | Biofluids and Cardiovascular Mechanics. 1 | 3 |
Biofluids and Cardiovascular Mechanics. Terms offered: this course is not currently offered. Basic principles of circulation including vascular fluid and solid mechanics, modelling techniques, clinical and experimental methods and the design of cardiovascular devices. | ||
| MECH 497 | Value Engineering. | 3 |
Value Engineering. Terms offered: this course is not currently offered. Value Engineering is an in-depth analysis of an industrial product or process with a view to improving its design and/or performance to increase its worth. This is a workshop type of course. Projects will be supplied by industrial firms and students will work in teams with industrial personnel. | ||
| MECH 498 | Interdisciplinary Design Project 1. | 3 |
Interdisciplinary Design Project 1. Terms offered: this course is not currently offered. Completion of an individual project on an interdisciplinary theme with emphasis on a balanced combination on analysis and synthesis. | ||
| MECH 499 | Interdisciplinary Design Project 2. | 3 |
Interdisciplinary Design Project 2. Terms offered: this course is not currently offered. The individual project initiated in MECH 498 is continued and finalized in this course. | ||
| MECH 513 | Control Systems. | 3 |
Control Systems. Terms offered: this course is not currently offered. State-space modelling and related linear algebra. Controllability and observability of linear time-invariant systems and corresponding tests, system realizations. Stability: Bounded-Input-Bounded-Output (BIBO), internal, Lyapunov. Linear state feedback control: pole placement and root locus design methods, linear quadratic regulator. State observers: full- and reduced-order designs, separation principle, Linear Quadratic Gaussian (LQG) design. Introduction to optimal control and optimal state estimation. | ||
| MECH 530 | Mechanics of Composite Materials. | 3 |
Mechanics of Composite Materials. Terms offered: this course is not currently offered. Fiber-reinforced composites. Stress, strain, and strength of composite laminates and honeycomb structures. Failure modes and failure criteria. Environmental effects. Manufacturing processes. Design of composite structures. Computer modelling of composites. Computer techniques are utilized throughout the course. | ||
| MECH 532 | Aircraft Performance, Stability and Control. | 3 |
Aircraft Performance, Stability and Control. Terms offered: this course is not currently offered. Aircraft performance criteria such as range, endurance, rate of climb, maximum ceiling for steady and accelerated flight. Landing and take-off distances. Static and dynamic stability in the longitudinal (stick-fixed and stick-free) and coupled lateral and directional modes. Control response for all three modes. | ||
| MECH 535 | Turbomachinery and Propulsion. | 3 |
Turbomachinery and Propulsion. Terms offered: this course is not currently offered. Introduction to propulsion: turboprops, turbofans and turbojets. Review of thermodynamic cycles. Euler turbine equation. Velocity triangles. Axial-flow compressors and pumps. Centrifugal compressors and pumps. Axial-flow turbines. Loss mechanisms. Dimensional analysis of turbomachines. Performance maps. 3-D effects. Introduction to numerical methods in turbomachines. Prediction of performance of gas turbines. | ||
| MECH 536 | Aerospace Structures. | 3 |
Aerospace Structures. Terms offered: this course is not currently offered. Aircraft and spacecraft structural components and loads. Bending, shear, torsion and buckling of thin-walled open and closed sections. Structural idealization. Principle of stiffener / web construction. Trusses and isogrid structures. Wing spars and box beams. Fuselage frames and wing ribs. Analysis of riveted, bolted and adhesive joints. Sandwich structures analysis. Thermoelasticity analysis for spacecraft structures. | ||
| MECH 543 | Design with Composite Materials. | 3 |
Design with Composite Materials. Terms offered: this course is not currently offered. Material systems/selection process. Cost vs. performance. Laminate layup procedures. Theory and application of filament winding of composite cylinders. Regular oven and autoclave oven curing, analysis of resulting material performance. Practical design considerations and tooling. Analysis of environmental considerations. Joining techniques. Analysis of test methods. Theory of repair techniques. | ||
| MECH 544 | Processing of Composite Materials. | 3 |
Processing of Composite Materials. Terms offered: this course is not currently offered. Composite processing science basic principles. Reinforcement properties; permeability, compaction. Resin properties; curing, viscosity, shrinkage. Heat transfer and cure kinetics; cure cycle optimization. Resin flow; infusion, thickness variations, fiber volume fraction distribution. Residual stresses; tool-part interaction, warpage control, spring-back, tool design. Thermoplastic composites; crystallization control, melting and consolidation. | ||
| MECH 553 | Design and Manufacture of Microdevices. | 3 |
Design and Manufacture of Microdevices. Terms offered: this course is not currently offered. Introduction to microelectromechanical systems (MEMS). Micromachining techniques (thin-film deposition; lithography; etching; bonding). Microscale mechanical behaviour (deformation and fracture; residual stresses; adhesion; experimental techniques). Materials- and process-selection. Process integration. Design of microdevice components to meet specified performance and reliability targets using realistic manufacturing processes. | ||
| MECH 559 | Engineering Systems Optimization. | 3 |
Engineering Systems Optimization. Terms offered: this course is not currently offered. Introduction to systems-oriented engineering design optimization. Emphasis on i) understanding and representing engineering systems and their structure, ii) obtaining, developing, and managing adequate computational (physics- and data-based) models for their analysis, iii) constructing appropriate design models for their synthesis, and iv) applying suitable algorithms for their numerical optimization while accounting for systems integration issues. Advanced topics such as coordination of distributed problems and non-deterministic design optimization methods. | ||
| MECH 560 | Eco-design and Product Life Cycle Assessment . | 3 |
Eco-design and Product Life Cycle Assessment . Terms offered: this course is not currently offered. Fundamentals of both product and process engineering with an emphasis on life cycle models and sustainability. Practical and theoretical topics, methodologies, principles, and techniques. Practical methods such as Life Cycle Analysis, eco-design strategies, streamlined Life Cycle Assessment, environmental impact assessment, and Life Cycle Engineering. Introduction to important product development theories and life cycle assessment theories. | ||
| MECH 563 | Biofluids and Cardiovascular Mechanics. 1 | 3 |
Biofluids and Cardiovascular Mechanics. Terms offered: this course is not currently offered. Basic principles of circulation including vascular fluid and solid mechanics, modelling techniques, clinical and experimental methods and the design of cardiovascular devices. | ||
| MECH 564 | Thermal Radiation and Solar Energy Systems. | 3 |
Thermal Radiation and Solar Energy Systems. Terms offered: this course is not currently offered. Fundamentals of thermal radiation. Black body thermal radiation. Radiative properties of real materials. Surface-to-surface radiation exchange. Radiation with conduction and convection. Radiation in absorbing, emitting and scattering media. Numerical methods to solve radiative transfer equation. Solar thermal energy systems. Solar collectors. Concentrating Solar Power (CSP) technology. | ||
| MECH 565 | Fluid Flow and Heat Transfer Equipment. | 3 |
Fluid Flow and Heat Transfer Equipment. Terms offered: this course is not currently offered. Pipes and piping systems, pumps, and valves. Fans and building air distribution systems. Basic thermal design methods for fins and heat exchangers. Thermal design of shell-and-tube and compact heat exchangers. | ||
| MECH 573 | Mechanics of Robotic Systems. | 3 |
Mechanics of Robotic Systems. Terms offered: this course is not currently offered. Manipulator performance and design. Pick-and-place and continuous-path operations. Computation of rigid-body angular velocity and acceleration from point-data measurements. Inverse kinematics of serial manipulators with coupled architectures; kinetostatics of multifingered hands and walking machines. Kinematics and dynamics of parallel manipulators and wheeled mobile robots. | ||
- 1
Students choose either CHEE 563 Biofluids and Cardiovascular Mechanics. or MECH 563 Biofluids and Cardiovascular Mechanics.
3 credits chosen from courses at the 300-level or higher (approved by the Department) in the Faculty of Engineering (including MECH courses) or fromMIME 260 Materials Science and Engineering. or from courses at the 300 level or higher in the Faculty of Science, including MATH courses.
Complementary Studies (6 credits)
Group A - Impact of Technology on Society
3 credits from the following:
| Course | Title | Credits |
|---|---|---|
| ANTH 212 | Anthropology of Development. | 3 |
Anthropology of Development. Terms offered: this course is not currently offered. Processes of developmental change, as they affect small communities in the Third World and in unindustrialized parts of developed countries. Problems of technological change, political integration, population growth, industrialization, urban growth, social services, infrastructure and economic dependency. | ||
| BTEC 502 | Biotechnology Ethics and Society. | 3 |
Biotechnology Ethics and Society. Terms offered: Winter 2026 Examination of particular social and ethical challenges posed by modern biotechnology such as benefit sharing, informed consent in the research setting, access to medical care worldwide, environmental safety and biodiversity and the ethical challenges posed by patenting life. | ||
| ECON 225 | Economics of the Environment. | 3 |
Economics of the Environment. Terms offered: this course is not currently offered. A study of the application of economic theory to questions of environmental policy. Particular attention will be given to the measurement and regulation of pollution, congestion and waste and other environmental aspects of specific economies. | ||
| ECON 347 | Economics of Climate Change. | 3 |
Economics of Climate Change. Terms offered: this course is not currently offered. The course focuses on the economic implications of, and problems posed by, predictions of global warming due to anthropogenic emissions of greenhouse gases. Attention is given to economic policies such as carbon taxes and tradeable emission permits and to the problems of displacing fossil fuels with new energy technologies. | ||
| ENVR 201 | Society, Environment and Sustainability. | 3 |
Society, Environment and Sustainability. Terms offered: this course is not currently offered. This course deals with how scientific-technological, socio-economic, political-institutional and behavioural factors mediate society-environment interactions. Issues discussed include population and resources; consumption, impacts and institutions; integrating environmental values in societal decision-making; and the challenges associated with, and strategies for, promoting sustainability. Case studies in various sectors and contexts are used. | ||
| GEOG 200 | Geographical Perspectives: World Environmental Problems. | 3 |
Geographical Perspectives: World Environmental Problems. Terms offered: this course is not currently offered. Introduction to geography as the study of nature and human beings in a spatial context. An integrated approach to environmental systems and the human organization of them from the viewpoint of spatial relationships and processes. Special attention to environmental problems as a constraint upon Third World development. | ||
| GEOG 203 | Environmental Systems. | 3 |
Environmental Systems. Terms offered: this course is not currently offered. An introduction to system-level interactions among climate, hydrology, soils and vegetation at the scale of drainage basins, including the study of the global geographical variability in these land-surface systems. The knowledge acquired is used to study the impact on the environment of various human activities such as deforestation and urbanisation. | ||
| GEOG 302 | Environmental Management 1. | 3 |
Environmental Management 1. Terms offered: this course is not currently offered. An ecological analysis of the physical and biotic components of natural resource systems. Emphasis on scientific, technological and institutional aspects of environmental management. Study of the use of biological resources and of the impact of individual processes. | ||
| MGPO 440 | Strategies for Sustainability. 1 | 3 |
Strategies for Sustainability. Terms offered: this course is not currently offered. This course explores the relationship between economic activity, management, and the natural environment. Using readings, discussions and cases, the course will explore the challenges that the goal of sustainable development poses for our existing notions of economic goals, production and consumption practices and the management of organizations. | ||
| PHIL 343 | Biomedical Ethics. | 3 |
Biomedical Ethics. Terms offered: this course is not currently offered. An investigation of ethical issues as they arise in the practice of medicine (informed consent, e.g.) or in the application of medical technology (in vitro fertilization, euthanasia, e.g.) | ||
| RELG 270 | Religious Ethics and the Environment. | 3 |
Religious Ethics and the Environment. Terms offered: this course is not currently offered. Environmental potential of various religious traditions and secular perspectives, including animal rights, ecofeminism, and deep ecology. | ||
| SOCI 235 | Technology and Society. | 3 |
Technology and Society. Terms offered: this course is not currently offered. An examination of the extent to which technological developments impose constraints on ways of arranging social relationships in bureaucratic organizations and in the wider society: the compatibility of current social structures with the effective utilization of technology. | ||
| SOCI 312 | Sociology of Work and Industry. | 3 |
Sociology of Work and Industry. Terms offered: this course is not currently offered. The development of the world of work from the rise of industrial capitalism to the postindustrial age. Responses of workers and managers to changing organizational, technological and economic realities. Interrelations between changing demands in the workplace and the functioning of the labour market. Canadian materials in comparative perspective. | ||
| URBP 201 | Planning the 21st Century City. | 3 |
Planning the 21st Century City. Terms offered: this course is not currently offered. The study of how urban planners respond to the challenges posed by contemporary cities world-wide. Urban problems related to the environment, shelter, transport, human health, livelihoods and governance are addressed; innovative plans to improve cities and city life are analyzed. | ||
- 1
Note: Management courses have limited enrolment and registration dates. See Important Dates at http://www.mcgill.ca/importantdates.
Group B - Humanities and Social Sciences, Management Studies, and Law
3 credits at the 200 level or higher from the following departments:
Anthropology (ANTH)
Economics (any 200- or 300-level course excluding ECON 227 Economic Statistics., and ECON 337 Introductory Econometrics 1.)
History (HIST)
Philosophy (excluding PHIL 210 Introduction to Deductive Logic 1. and PHIL 310 Intermediate Logic.)
Political Science (POLI)
Psychology (excluding PSYC 204 Introduction to Psychological Statistics. and PSYC 305 Statistics for Experimental Design., but including PSYC 100 Introduction to Psychology.)
Religious Studies (RELG) (excluding courses that principally impart language skills, such as Sanskrit, Tibetan, Tamil, New Testament Greek, and Biblical Hebrew)1
School of Social Work (SWRK)
Sociology (excluding SOCI 350 Statistics in Social Research.)
OR one of the following:
| Course | Title | Credits |
|---|---|---|
| ARCH 528 | History of Housing. | 3 |
History of Housing. Terms offered: this course is not currently offered. Indigenous housing both transient and permanent, from the standpoint of individual structure and pattern of settlements. The principal historic examples of houses including housing in the age of industrial revolution and contemporary housing. | ||
| BUSA 465 | Technological Entrepreneurship. 2 | 3 |
Technological Entrepreneurship. Terms offered: this course is not currently offered. Concentrating on entrepreneurship and enterprise development, particular attention is given to the start-up, purchasing and management of small to medium-sized industrial firms. The focal point is in understanding the dilemmas faced by entrepreneurs, resolving them, developing a business plan and the maximum utilization of the financial, marketing and human resources that make for a successful operation. | ||
| CLAS 203 | Greek Mythology. | 3 |
Greek Mythology. Terms offered: this course is not currently offered. A survey of the myths and legends of Ancient Greece. | ||
| ENVR 203 | Knowledge, Ethics and Environment. | 3 |
Knowledge, Ethics and Environment. Terms offered: this course is not currently offered. Introduction to cultural perspectives on the environment: the influence of culture and cognition on perceptions of the natural world; conflicts in orders of knowledge (models, taxonomies, paradigms, theories, cosmologies), ethics (moral values, frameworks, dilemmas), and law (formal and customary, rights and obligations) regarding political dimensions of critical environments, resource use, and technologies. | ||
| ENVR 400 | Environmental Thought. | 3 |
Environmental Thought. Terms offered: this course is not currently offered. Students work in interdisciplinary seminar groups on challenging philosophical, ethical, scientific and practical issues. They will explore cutting-edge ideas and grapple with the reconciliation of environmental imperatives and social, political and economic pragmatics. Activities include meeting practitioners, attending guest lectures, following directed readings, and organizing, leading and participating in seminars. | ||
| FACC 220 | Law for Architects and Engineers. | 3 |
Law for Architects and Engineers. Terms offered: this course is not currently offered. Aspects of the law which affect architects and engineers. Definition and branches of law; Federal and Provincial jurisdiction, civil and criminal law and civil and common law; relevance of statutes; partnerships and companies; agreements; types of property, rights of ownership; successions and wills; expropriation; responsibility for negligence; servitudes/easements, privileges/liens, hypothecs/ mortgages; statutes of limitations; strict liability of architect, engineer and builder; patents, trade marks, industrial design and copyright; bankruptcy; labour law; general and expert evidence; court procedure and arbitration. | ||
| FACC 500 | Technology Business Plan Design. | 3 |
Technology Business Plan Design. Terms offered: this course is not currently offered. This course combines several management functional areas such as marketing, financial, operations and strategy with the skills of creativity, engineering innovation, leadership and communications. Students learn how to design an effective and winning business plan around a technology or engineering project in small, medium or large enterprises. | ||
| FACC 501 | Technology Business Plan Project. | 3 |
Technology Business Plan Project. Terms offered: this course is not currently offered. Students work in teams to develop a comprehensive business plan project based on a technological or engineering innovation while utilizing site visits. | ||
| HISP 225 | Hispanic Civilization 1. | 3 |
Hispanic Civilization 1. Terms offered: this course is not currently offered. A survey of historical and cultural elements which constitute the background of the Hispanic world up to the 18th century; a survey of the pre-Columbian indigenous civilizations (Aztec, Maya and Inca) and the conquest of America. | ||
| HISP 226 | Hispanic Civilization 2. | 3 |
Hispanic Civilization 2. Terms offered: this course is not currently offered. A survey of the constitution of the ideological and political structures of the Spanish Empire in both Europe and America until the Wars of Independence; a survey of the culture and history of the Hispanic people from the early 19th Century to the present. | ||
| INDR 294 | Introduction to Labour-Management Relations. 2 | 3 |
Introduction to Labour-Management Relations. Terms offered: this course is not currently offered. An introduction to labour-management relations, the structure, function and government of labour unions, labour legislation, the collective bargaining process, and the public interest in industrial relations. | ||
| INTG 215 | Entrepreneurship Essentials for Non-Management Students. 3 | 3 |
Entrepreneurship Essentials for Non-Management Students. Terms offered: this course is not currently offered. Fundamental concepts, theories, and practices of entrepreneurship. Focus on identifying opportunities, developing business ideas, and understanding key components of starting and managing a business. | ||
| MATH 338 | History and Philosophy of Mathematics. | 3 |
History and Philosophy of Mathematics. Terms offered: this course is not currently offered. Egyptian, Babylonian, Greek, Indian and Arab contributions to mathematics are studied together with some modern developments they give rise to, for example, the problem of trisecting the angle. European mathematics from the Renaissance to the 18th century is discussed, culminating in the discovery of the infinitesimal and integral calculus by Newton and Leibnitz. Demonstration of how mathematics was done in past centuries, and involves the practice of mathematics, including detailed calculations, arguments based on geometric reasoning, and proofs. | ||
| MGCR 222 | Introduction to Organizational Behaviour. 2 | 3 |
Introduction to Organizational Behaviour. Terms offered: Summer 2025 Individual motivation and communication style; group dynamics as related to problem solving and decision making, leadership style, work structuring and the larger environment. Interdependence of individual, group and organization task and structure. | ||
| MGCR 352 | Principles of Marketing. 2 | 3 |
Principles of Marketing. Terms offered: Summer 2025 Introduction to marketing principles, focusing on problem solving and decision making. Topics include: the marketing concept; marketing strategies; buyer behaviour; Canadian demographics; internal and external constraints; product; promotion; distribution; price. Lectures, text material and case studies. | ||
| ORGB 321 | Leadership. 2 | 3 |
Leadership. Terms offered: Summer 2025 Leadership theories provide students with opportunities to assess and work on improving their leadership skills. Topics include: the ability to know oneself as a leader, to formulate a vision, to have the courage to lead, to lead creatively, and to lead effectively with others. | ||
| ORGB 423 | Human Resources Management. 2 | 3 |
Human Resources Management. Terms offered: this course is not currently offered. Issues involved in personnel administration. Topics include: human resource planning, job analysis, recruitment and selection, training and development, performance appraisal, organization development and change, issues in compensation and benefits, and labour-management relations. | ||
- 1
If you are uncertain whether or not a course principally imparts language skills, please see an adviser in the McGill Engineering Student Centre (Frank Dawson Adams Building, Room 22) or email an adviser.
- 2
Note: Management courses have limited enrolment and registration dates. See Important Dates at http://www.mcgill.ca/importantdates.
- 3
INTG 215 Entrepreneurship Essentials for Non-Management Students. is not open to students who have taken INTG 201 Integrated Management Essentials 1. and INTG 202 Integrated Management Essentials 2..
Note regarding language courses: Language courses are not accepted to satisfy the Complementary Studies Group B requirement, effective for students who entered the program as of Fall 2017.
Typical Program of Study
Students entering the program from CEGEP follow a different course of study from those entering from out of province. Students will be advised by the Department as to which courses they should select from the course lists above.
For a detailed curriculum, see http://www.mcgill.ca/mecheng/undergrad/curriculum.
For all minors and concentrations, students should complete a Course Authorization Form, available from the McGill Engineering Student Centre (Student Affairs Office) (Frank Dawson Adams Building, Room 22) or from the Undergraduate Program Coordinator, indicating their intention to take the minor or concentration.